Jayton High School Dimmer Console Operating Instructions: TURN THE POWER ON - The power button is located on the back right side of the console. When the power is turned on, the console powers up with the Black Out function activated. To deactivate, tap the Black Out Button. The console is now ready to use. CHANNEL SLIDERS - There are two (2) sets of channel sliders, Preset A (Slides 1 - 24) and Preset B (Slides 25 - 48). When the Mode Select is set in middle position (Double Preset - Amber light), you can preset lighting for two (2) different scenes and use the Master slides to change from one scene lighting to the other. To use this feature, tap the Mode Select button until the abler light appears. Slide the Master A slide to 10 and the Master B slide to 0 (Both Master slides will be in the UP position). Now, use slides 1 - 24 to set the first scene. Next, slide the Master A slide to 0 and the Master B slide to 10 (Both Master slides will be in the DOWN position) and use slides 25 - 48 to set the second scene. Your first two (2) lighting scenes are now set and you can change from one scene to the other just by sliding both Master slides up or down together. When you are through with the first lighting scene on Preset A and you slide both Master slides down for the second lighting scene on Preset B, you can now reset Preset A for the third lighting scene, and so on throughout the play.

Sound Board

Auditorium
School Layout
Lights & Information
Light & Sound Control
Main Page